In this guide, we will look at dust collection as a system. We’ll then discuss each individual component of the system and how it can help or hurt overall performance. Then, we’ll talk about what to consider as you work to achieve the best design for your specific individual needs. I will also show you two videos of two different systems I set up and used here in my workshop.

Electrostatic precipitator (ESP) is a kind of dust removal equipment in which dust particles are ionized by high voltage electric field and charged by dust particles. Under the action of electric field force, dust particles are deposited on the electrode, so that dust particles and dust gases are separated. It can effectively recover the dust in the gas to purify the gas. The dust removal efficiency can reach 99% or even higher under suitable conditions. At present, it has been widely used in chemical industry, thermal power generation, cement, metallurgy, paper making and electronics, etc.

DIY Dust Collector System with Homemade Blast Gates and Automatic Start/Stop Function.

Dust collector
WDC-90,150

Temp. Range

5°C~38°C

Humidity Range

40%~80%

Features

  • Large dust collecting volume, simple operation and easy maintenance.
  • Water washing, best washing effect.
  • Special circuit design, increasing 30% dust collecting volume more than dry mode.
  • Without semi-obstruction problem incurred in dry mode.
  • High efficiency vapor remove design without outflow.
  • Low noise, stable operation and satisfying environmental requirements.
  • Unique feet wheel and shoke prevention design, which is easy for moving and installation.

Specifications

Machine Model WDC-90
Location Indoor
Ambient temperature 5°C~38°C
Humidity range 40%~80%
Power 3 P 220/380V-50/60Hz
Dust removal liquid Tap water
Water sprinkling volume L/min 150
Water Consumption Kg/h 9
Water storage volume L 260
Airflow m3/min 42
Static pressure mmaq 185
Blower HP 3HP
Pump HP 1HP
Blower Kw 2.3
Pump Kw 0.4
Total power consumption Kw 2.7
Remote control power DC24V
Contact of remote control Nvg
Power circuit No fuse breaker, Phase control, Overloading protection
Auto water-filling valve 3/4"
Drain valve 1"
Vent pipe 6"/8"
Dimension LxWxH mm 1340x860x1960
Color Black / Red
Weight kg 380

Also have the AT-A2, AT-AL, AT-AL2 system further for your choice.
We reserve the right that modification designs and technique parameter change and will not notice specially.

Machine Model WDC-150
Location Indoor
Ambient temperature 5°C~38°C
Humidity range 40%~80%
Power 3 P 220/380V-50/60Hz
Dust removal liquid Tap water
Water sprinkling volume L/min 300
Water Consumption Kg/h 15
Water storage volume L 450
Airflow m3/min 80
Static pressure mmaq 234
Blower HP 7.5HP
Pump HP 2HP
Blower Kw 5.5
Pump Kw 1.5
Total power consumption Kw 7
Remote control power DC24V
Contact of remote control Nvg
Power circuit No fuse breaker, Phase control, Overloading protection
Auto water-filling valve 3/4"
Drain valve 1"
Vent pipe 10"/12"
Dimension LxWxH mm 1760x1050x1960
Color Black / Red
Weight kg 450

Also have the AT-A2, AT-AL, AT-AL2 system further for your choice.
We reserve the right that modification designs and technique parameter change and will not notice specially.

Dust collection systems are key to maintaining appropriate conditions for employees and equipment in industrial workspaces. Dust collectors are designed and constructed to filter airborne dust and debris that can cause injury or illness to employees, damage or degrade equipment, and negatively impact plant production. In light of this important function, it is essential to choose the right dust collection system to maintain a clean, productive, and compliant work environment. Below is an overview of some of the considerations to keep in mind when designing and selecting a dust collector system.